Step 1. Disconnect power to all other shades to prevent unwanted adjustments.
Step 2. Press UP or Down, put your shade in motion. When the shade reaches your desired "MY" position, press and release "MY" to stop the shade.
Step 3. When the shade is stopped at your new desired "MY" position, press and hold "MY" for approximately 5 seconds, When the shade jogs, release the "MY" button. You have now saved your new "MY" position.
Sheer shades - The default home position is preset to shade lowered and vanes closed.
Layered shades - the default home position is preset to shade lowered and stipes open.
When using the wall switch, the favorite position use the "STOP" in place of the "MY".