If the UP and DOWN buttons on your remote are reversed, follow these steps to switch them back.
2 Button and Single Channel Remote Instructions:
1. Move thes shade to any point between the upper and lower limits.
2. Press and hold the UP and DOWN buttons at the same time for 3 seconds. When the remote LED turns amber, release both buttons.
The shade will jog.
3. Press and hold the UP and DOWN buttons at the same time for another 3 seconds. When the remote LED turns amber, release both buttons.
The shade will jog, and the direction has now been reversed.
MULTI CHANNEL INSTRUCTIONS
1. Press and hold the MENU/RIGHT button for 2 seconds to enter the menu.
2. Select SHADE>LIMITS
3. To proceed past the warning message, press and hold the MENU/RIGHT button for 2 seconds.
4. Scroll to the left and right to select the shade you want to adjust.
5. Select TRAV DIR
The shade will travel and then jog two times, and the direction has now been reversed.