Pair a Multi-Channel Remote with a Group of Shades already controlled by a Single Channel group remote.   See below if using a Multi Channel Remote 


If you bought a new multi-channel remote and want to pair it with a shade or group of shades that are already controlled by a Single Channel/Plus group remote, follow these steps. 


1.  On the group remote, quickly press and release the program button twice.

                             The remote LED will flash amber and green.

                                                           

2.  On the multi-channel remote, press and hold the MENU/RIGHT button for 2 seconds. 

                                                               

3.  Select ZWAVE > LEARN. 

               The group remote LED will flash green and then turn off.  The multi-channel remote will show JOINING on the screen. 

                                                                

4.  Select SHADE > FIND > BEGIN.

            The multi-channel remote will show FOUND SHADES.

                                                                

5.  Each shade will need assigned to a channel on the Multi Channel remote.  Follow the steps below:


MULTI CHANNEL REMOTE CHANNEL ASSIGNMENT INSTRUCTIONS

    1. Press and hold the MENU/RIGHT button for 2 seconds

    2. Select CHANNEL.

    3. Select the channel you want to assign the shade to by scrolling left or right

    4. Select the shade you want to assign to the channel by scrolling up or down

    5. Press and hold the MENU/RIGHT button for 2 seconds.

    The shade will job and a checkmark will appear next to the shade number on the remote screen

    6. Repeat steps 3-5 for each shade




Pair a Multi Channel Remote with a Group of Shades already controlled by a Multi Channel/Premium remote. 


If you bought a new multi-channel remote and want to pair it with a shade or group of shades that are already controlled by a Multi-Channel/Premium remote, follow these steps. 


1.  On the group multi-channel remote, press and hold the MENU/RIGHT button for 2 seconds. 


                         Original remote



2.  Select ZWAVE > INCLUDE. 

            The remote will display "Include Press Device Button"  

                

3. On the new multi-channel remote, press and hold the MENU/RIGHT button for 2 seconds. 


                          New remote


4.  Select ZWAVE > LEARN.     

            The multi-channel remote will show JOINING on the screen. 

                                                                       

5.  Select SHADE > FIND > BEGIN.

            The multi-channel remote will show FOUND SHADES.


6.  Each shade will need assigned to a channel on the Multi Channel remote.  Follow the steps below:


MULTI CHANNEL REMOTE CHANNEL ASSIGNMENT INSTRUCTIONS

    1. Press and hold the MENU/RIGHT button for 2 seconds

    2. Select CHANNEL.

    3. Select the channel you want to assign the shade to by scrolling left or right

    4. Select the shade you want to assign to the channel by scrolling up or down

    5. Press and hold the MENU/RIGHT button for 2 seconds.

    The shade will job and a checkmark will appear next to the shade number on the remote screen

    6. Repeat steps 3-5 for each shade