Note before you begin!    Do not press the programming button outside of this sequences unless otherwise instructed by a Customer Service Agent.  

NOTE: Before deleting controls/channels, keep the target shade powered but disconnect all other motors from their power source. 


Deleting a Control or Channel


1. Start with the controller or channel that you intend to keep and currently operates the shade

   

2. Use a paper clip or similar item to press and hold the programming button until the window covering jogs.


If the wrong shade jogs, you have selected the wrong channel. Press the programming button you just pressed until the shade jogs again. 

Select the correct channel and start again from step 1.


3. Select the control or channel to be deleted 


4. Use a paper clip or similar item to press and release (less than 2 seconds) the programming button on the control or channel you wish to remove. The window covering will jog to acknowledge.


The controller or channel have now been removed from the motors memory.    These steps will need repeated for each remote/channel.  



If you need to add a controller or channel to your shades, click here to add remote or channel