You might need to do this if you bought a new remote or shade. These steps apply only to the new remote or shade.

If you are using the Z-Wave Premium remote, click here for instructions. 


  1. Reset the remote to make sure you start with a clean slate. 
    1. Press and hold the program button on the back of the remote for 15 seconds. When the LED stops flashing, release the button. The remote LED should flash green, amber, and red before turning off.
       
    2. On the shade, press and hold the program button for 7 seconds. When the shade jogs, release the button.
       
  2. On the back of the remote, quickly press and release the program button twice. The remote LED will flash amber and green.
     
  3. On the shade, press and hold the program button for 3 seconds. When the shade LED flashes green, release the button. The shade will jog once, and all LEDs will turn off. The shade is now paired with the remote.