The home position is defaulted to approximately half way between the upper and lower limits. However, you might want to adjust this home position to accommodate light control. Adjusting the Home Position is easy!
If you are using the Plus Single Channel remote, click here for the proper steps.
1. Use the UP or DOWN buttons to move the shade to your new home position. This can be anywhere between the upper and lower limits.
2. Press and hold the MENU/RIGHT button for 2 seconds to enter the menu.
3. Select SHADE> SET HOME.
4. Select the shade you want to set the home position for by scrolling left or right.
5. Press and release the HOME button.
The shade will jog. This means you've set your new home position
