Before you begin:

a.  Identify what product listed below to locate the program button on the motor.  The various motor types are illustrated below.

b.  Have a paper clip or similar device

Locations of program buttons are based on the shade or blind (motor) type.  Certain products may need to be removed from the installation hardware to access.  


1. Press and hold the program button on the motor until the shade jogs once. 

 2. Select correct remote and channel.  Press and release the programming button on the control you are adding.  The shade will jog once (confirming the new controller has been added). 

Repeat for each shade to be added to new remote. 

NOTE: After initiating the first pairing step you will have 2 minutes before the motor times
out to complete the sequence.