Motorized Wand Control: Adjusting the Shade's Limit

Modified on Tue, 27 Jul, 2021 at 5:10 PM

Adjusting Limits or Home Position
  1. Press and HOLD the UP or Down or Home (position you are adjusting) for 3 seconds, release the button when the motor beeps and LED begins to flash.
  2. Press the UP or DOWN button to move the shade to the new desired position.
  3. Save the position by press and HOLD the HOME button for approximately 3 seconds. The motor will beep and the LED will go out.
  4. The SET MODE will time out after approximately 10 seconds of no button presses. The LED flashing will turn off. (confirms not in SET MODE)

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article