Smart Home Collection: How Do I Adjust Where My Shade Stops When Lowered (Bottom Limit)?

NOTE: If you own two (2) or more shades that only operate as a group, you will need to disconnect power from the shades you are not programming.

Setting the lower limit:

1. Using the remote that currently controls the shade, select the channel. If applicable, use the button at the bottom of the remote until the correct channel light is flashing.
   
   
2. Press and release the DOWN button to allow the shade to travel. Press and release the STOP button when the shade reaches the newly desired lower limit.
   
   
   
   
3. Once the shade is at the new Lower Limit, press and HOLD the STOP and DOWN buttons together until the shade jogs (short up/down motion) once.
   
   
   
   
   
4. Run the shade all the way up and back down to confirm the new lower limit has been saved.  
   
   
5. Repeat for each shade as necessary. 

For additional support:

• Email:  motorization.support@springswindowfashions.com, responses could take up to 2 business days
• Customer Service Team: 1-800-221-6352