ARC: How Do I Add My Shades To A New Channel Or New Controller?

NOTE: If you own two (2) or more shades that only operate as a group, you will need to disconnect power from the shades you are not programming.

Adding your shades to a new channel:

1. With the remote that currently controls the shade, select the channel, if applicable, using the plus (+) or minus (-) buttons on the controller.
   
   
2. Press and release the Programming button on the controller. The shade will jog (short up/down motion) once, and the motor will beep once.
   
   
   
   
3. Press and release the Programming button on the controller again. The shade will jog (short up/down motion) once, and the motor will beep once.
   
   
   
   
4. Select the channel, if applicable, on the remote you want to copy the shade using the plus (+) or minus (-) buttons.
   
   
5. Press and release the Programming button on the controller a third (3) time. The shade will jog (short up/down motion) twice, and the motor will beep three times.
   
   
                                                   
6. Run the shade all the way down and up down to confirm the new remote or channel operates the shade.  
   
   
7. Repeat for each shade as necessary. 

For additional support:

• Email:  motorization.support@springswindowfashions.com, responses may take up to 2 business days
• Customer Service Team: 1-800-221-6352