Smart Home Collection: How Do I Adjust Where My Shade Stops When Raised (Upper Limit)?

NOTE: If you own two (2) or more shades that only operate as a group, you will need to disconnect power from the shades you are not programming

Setting the upper limit:

1. Press and release the UP button to allow the shade to travel. Press and release the STOP button when the shade reaches the newly desired upper limit.
   
   
   
   
2. Once the shade is at the new Lower Limit, press and HOLD the STOP and UP buttons together until the shade jogs (short up/down motion) once.
   
   
   
   
3. Run the shade all the way down and up down to confirm the new lower limit has been saved.  
   
   
4. Repeat for each shade as necessary.

For additional support:

• Email:  motorization.support@springswindowfashions.com,  responses could take up to 24 hours
• Customer Service Team: 1800-221-6352