Z-Wave: My shade moves in the opposite direction of the button I pressed on my single channel remote

Modified on Mon, 13 Apr at 3:29 PM

If the UP and DOWN buttons on your remote are reversed, follow these steps to switch them back.

Standard a Single Channel Remote Instructions:

1. Move thes shade to any point between the upper and lower limits.

2. Press and hold the UP and DOWN buttons at the same time for 3 seconds. When the remote LED turns amber, release both buttons.

The shade will jog.

3. Press and hold the UP and DOWN buttons at the same time for another 3 seconds. When the remote LED turns amber, release both buttons.

The shade will jog, and the direction has now been reversed.

For additional support:

Customer Service Team: 1-800-221-6352

Note: Responses could take up to 24 hours