Once you replaced your Z-Wave motor, you will need to add the shade to the remote and adjust the lower limit.   Please use these instructions. 


If not connecting to a Home Automation System, skip to step 5

  1. If applicable, include/enroll your shades in the home automation app. (Ignore this step if you don't use a home automation system.)
    • From your home automation system’s user interface, select the option to enroll a new Z-Wave device.
      See your home automation system’s instructions for details.
    • On one of your shades, press and hold the program button for 3 seconds. When the shade LED flashes green, release the button.
      The shade should appear as a found Z-Wave device in your home automation system’s user interface.
    • Repeat the steps above for each shade.

  2. If applicable, include/enroll your remotes in the home automation app. (Ignore this step if you don't use a home automation system.)
    • From your home automation system’s user interface, select the option to enroll a new Z-Wave device.
      See your home automation system’s instructions for details.
    • On one of your remotes, Press and HOLD the MENU/RIGHT button 
    • Select ZWAVE then Arrow down to LEARN
    • The remote should appear as a found Z-Wave device in your home automation system’s user interface.

    • Repeat the steps above for each remote.

  3. Set up the automation features within the home automation app to operate multiple shades within a group. (Ignore this step if you don't use a home automation system, or if you don't want to operate multiple shades within a group using the home automation system.) 
  4. If applicable, associate the remote to each shade (go to next step if you don't use a home automation system) by doing one of the following:

    1. On the remote control, press MENU/RIGHT for 2 seconds to enter the menu

      1. Select ZWAVE then arrow down to Associate

    2. On the shade, press and HOLD the program button for 3 seconds.  When the shade LED flashes green, release the button

    3. Repeat steps 1 and 2 for each shade you want to control with a remote.    

    4. Assign the shades to a channel. 

      1. Press and Hold MENU/RIGHT to enter the menu
      2. Select Channel      
      3. Select the channel you want to assign the shade to by scrolling left or right
      4. Select the shade number you want to assign to the channel by scrolling up or down  
      5.  
      6. Press and HOLD the MENU/RIGHT button for 2 seconds.  (the shade will jog and a checkmark will appear next to the shade number on the remote screen)
      8. Repeat steps 3-5 for each shade
  5. If applicable, associate the remote to each shade (if not using a home automation system) by doing one of the following:

    1. On the remote control, press MENU/RIGHT for 2 seconds to enter the menu

      1. Select ZWAVE then arrow down to ZWAVE then arrow down to INCLUDE  

    2. On the shade, press and HOLD the program button for 3 seconds.  When the shade LED flashes green, release the button

    3. Repeat steps 1 and 2 for each shade you want to control with this remote.    

    4. Assign the shades to a channel. 

      1. Press and Hold MENU/RIGHT to enter the menu
      2. Select Channel      
      3. Select the channel you want to assign the shade to by scrolling left or right
      4. Select the shade number you want to assign to the channel by scrolling up or down   
      5.                                  
      6. Press and HOLD the MENU/RIGHT button for 2 seconds.  (the shade will jog and a checkmark will appear next to the shade number on the remote screen)  
      7.                                


Next, the Lower Limit will need adjusted on the shade

1. On the remote, press and hold the MENU/RIGHT button for 2 seconds to enter the menu.

2. Select SHADE > LIMITS.

3. To proceed past the warning message, press and hold the MENU/RIGHT button for 2 seconds.

4. Scroll left and right to select the shade you want to adjust the lower limit for.

5. Scroll to LOWER, then press and hold the MENU/RIGHT button for 2 seconds.

If the shade isn't already at the current lower limit, it will move to that position. If the shade is already at the current lower limit, it will jog.

6. Use the UP or DOWN buttons to move your shade to the new lower limit.

7. Press and release the MENU/RIGHT button to set the lower limit.

The shade will jog. This means you've set your new lower limit


NOTE: If you don't press any buttons for 10 seconds while you're making these adjustments, the remote will time out. If that happens, just start the process over.




For additional support:

[email protected] or

Customer Service 

1-800-221-6352