If the Gateway LED is flashing blue (one sec between) then the Gateway is not connected to Wi-Fi
- Make sure the Wi-Fi network in the home is working and on
- Make sure the Gateway is plugged into an area there is a stable, healthy Wi-Fi signal
- Unplug and plug back in the Gateway (power cycle) and let it reestablish the Wi-Fi connection
- If still flashing, check your phones Wi-Fi settings and see if the atom network is broadcasting (Atom_######). IF it is, the Gateway needs to have the Wi-Fi details setup again. Go to the main account page and click “+” or “Add new Gateway” and follow the prompts for setting it up. Note: After you get through the setup process, you will receive a popup box that reads, this Gateway is already setup to an account. Just click OK, the Gateway will remember the Wi-Fi details you just entered
- If still flashing and the Atom Wi-Fi network is NOT showing in the Wi-Fi settings, then quickly double tap the Gateway program button. This will clear the Wi-Fi settings in memory, now see, STEP D for reconnecting the Gateway to Wi-Fi
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article