Glydea RTS: How Do I Reverse The Direction The Motor Travels?

Follow these steps if the drapery is working in reverse, down is up and up is down, with the remote.

NOTE: If you own two (2) or more motorized products that only operate as a group, you will need to disconnect power from the products you are not programming.

1. Using the remote that currently controls the shade, select the channel, if applicable, by using the button at the bottom of the remote until the correct channel light is flashing.
2. Run the drapery to the halfway point in the window and stop it using the “MY” (“stop”) button.
3. Hold the UP and DOWN buttons together until the drapery jogs (short up/down motion).
4. Press and hold "MY" ("stop") button until the drapery jogs once.
5. Confirm that the drapery now works in the correct direction.

You may need to adjust the open or closed limit on your drapery now the direction has been corrected. Follow the links below for the related instructions.

Adjusting the open and closed limits. 

For additional support:

Email: motorization.support@springswindowfashions.com, responses could take up to 24 hours

Customer Service Team: 1-800-221-6352