Glydea RTS: How Do I Adjust The Speed Of My Motor?

NOTE: If you own two (2) or more motorized products that only operate as a group, you will need to disconnect power from the products you are not resetting and programming.

How to Adjust Speed on my motorized drapery track:

1. Using the controller that controls the drape, select the channel, if applicable, by using the button at the bottom of the remote until the correct channel light is flashing.
2. Move the drape using the UP or DOWN arrows until the drape is in the middle of the window.
3. Press and HOLD the UP and MY (STOP) buttons together until the shade starts to open and close on its own.
4. To INCREASE the drapes speed, press and hold the UP button until the drape jogs. Keep repeating this process until you reach the desired speed, or the drape reaches the maximum speed possible.

NOTE: The drape will no longer jog when trying to increase the speed if it is already at the maximum speed.

1. To DECREASE the drapes speed, press and hold the DOWN button until the drape jogs. Keep repeating this process until you reach the desired speed, or the drape reaches the slowest speed possible.
   NOTE: The drape will no longer jog when trying to decrease the speed if it is already at the slowest speed.
2. Press and HOLD the MY (STOP) button until the shade jogs (short up/down motion) once.
3. Repeat for each drape as necessary.

For additional support:

Email: motorization.support@springswindowfashions.com, responses could take up to 24 hours

Customer Service Team: 1-800-221-6352