RTS: How Do I Adjust The Speed Of My 12v, 24v, Or Tilt Motor?

NOTE: If you own two (2) or more shades that only operate as a group, you will need to disconnect power from the shades you are not resetting and programming.

How to Adjust Speed on my motorized shade:

1. Using the remote you want to control the shade, select the channel, if applicable, using the button at the bottom of the remote until the correct channel light is flashing.
   
   
2. Move the shade using the UP or DOWN arrows until the shade is in the middle of the window.
   
   
3. Press and HOLD the UP, MY (STOP), and DOWN together until the shade jogs (short up/down motion) once.
   
4. To INCREASE the shades speed, press and hold the UP button until the shade jogs. Keep repeating this process until you reach the desired speed or the shade reaches the maximum speed possible.
   
   NOTE: The shade will no longer jog when trying to increase the speed if it is already at the maximum speed.
   
   
5. To DECREASE the shades speed, press and hold the DOWN button until the shade jogs. Keep repeating this process until you reach the desired speed or the shade reaches the slowest speed possible.
   
   NOTE: The shade will no longer jog when trying to decrease the speed if it is already at the slowest speed.

6. Repeat for each shade as necessary.

For additional support:

Email:  motorization.support@springswindowfashions.com, responses could take up to 24 hours

Customer Service Team: 1-800-221-6352