RTS: How Do I Adjust My Shade's Upper And Lower Limit?

NOTE: If you own two (2) or more shades that only operate as a group, you will need to disconnect power from the shades you are not programming.

Setting the lower limit:

1. Using the remote that currently controls the shade, select the channel, if applicable, using the button at the bottom of the remote until the correct channel light is flashing.
2. Press and release the DOWN button to allow the shade to travel and stop on its own at the current lower limit.
   
3. Press and HOLD the UP and DOWN buttons together until the shade jogs (short up/down motion) once.
   
4. HOLD the UP or DOWN button until the shade reaches the new Lower Limit.
5. Once the shade reaches the new Lower Limit, press and HOLD the “MY” or “STOP” button until the shade jogs.
   
6. Run the shade all the way up and back down to confirm the new lower limit has been saved.
7. Repeat for each shade as necessary.

Setting the upper limit:

1. Using the remote that currently controls the shade, select the channel. If applicable, use the button at the bottom of the remote until the correct channel light is flashing.
2. Press and release the UP button to allow the shade to travel and stop on its own at the current Upper Limit.
   
3. Press and HOLD the UP and DOWN buttons together until the shade jogs (short up/down motion) once.
   
4. HOLD the UP or DOWN button until the shade reaches the new Upper Limit.
5. Once the shade reaches the new Upper Limit, press and HOLD the “MY” or “STOP” button until the shade jogs.
   
6. Run the shade all the way down and back up to confirm the new Upper Limit has been saved. 
7. Repeat for each shade as necessary.

For additional support:

Email:  motorization.support@springswindowfashions.com, responses could take up to 24 hours

Customer Service Team: 1-800-221-6352