Zigbee How Do I Adjust The Speed of The Shade?

Modified on Sat, 16 May at 12:29 PM

Speed adjustments for Zigbee motors must be done through the Tahoma Pro

app. To adjust the speed, follow the instructions listed below:

1. If a Tahoma Switch is not going to be used, open the Tahoma Pro app and then

select “configure a motor”, then tap “next”.

2. The next screen should read “Will you be deploying a Tahoma hub for this

project?”. Select “no”.

3. Scan the QR code for the motor that you want to change the speed.

4. On the next screen, select “set equipment”, then select “nominal speed”. The

speed can be set anywhere from 10 RPMs to 28 RPMs Speed adjustments for Zigbee motors must be done through the Tahoma Pro

app. To adjust the speed, follow the instructions listed below:

1. If a Tahoma Switch is not going to be used, open the Tahoma Pro app and then

select “configure a motor”, then tap “next”.

2. The next screen should read “Will you be deploying a Tahoma hub for this

project?”. Select “no”.

3. Scan the QR code for the motor that you want to change the speed.

4. On the next screen, select “set equipment”, then select “nominal speed”. The

speed can be set anywhere from 10 RPMs to 28 RPMs

Speed adjustments for Zigbee motors must be done through the Tahoma Pro app. To adjust the speed, follow the instructions listed below:

If a Tahoma Switch is not going to be used, open the Tahoma Pro app and then select “configure a motor”, then tap “next”.

The next screen should read “Will you be deploying a Tahoma hub for this project?”. Select “no”.

Scan the QR code for the motor that you want to change the speed.

On the next screen, select “set equipment”, then select “nominal speed”. The speed can be set anywhere from 10 RPMs to 28 RPMs

For additional support:

Email: motorization.support@springswindowfashions.com, responses could take up to 24 hours

Customer Service Team: 1-800-221-6352